The ASTM B117 evaluation method is the standard set by The American Society for operating Salt Spray / Fog testing of materials. Before products are placed in the marketplace to face ever-changing environmental conditions, they must under go a variety of examinations to ensure reliability. C & C provides the ASTM B117 analysis method for Salt Spray (Corrosion) Testing. C & C Salt / Fog assessment involves placing the required pieces into a controlled environment to evaluate. The scope of our ISO IEC 17025 Accreditation Certificate is available on our website which details information regarding the evaluation methods used for Salt Spray analysis including the ASTM B117. C & C's Accredited Laboratory and highly skilled engineers are equipped to provide ASTM B117 testing procedures that meet or exceed expectations. The American Society for Testing Materials (ASTM) is universally recognized for providing standards that are accepted and used in research and development, product testing, quality systems and commercial transactions. Before products are placed in the marketplace to face ever-changing environmental conditions, they must under go a variety of tests to ensure reliability. C & C provides the ASTM B117 test method for Salt Spray (Corrosion) Testing. You may view the scope of our ISO IEC 17025 Accreditation Certificate on our website which details information regarding the test methods used for Salt Spray Tests including the ASTM. C & C's state of the art Accredited Laboratory and highly skilled engineers are equipped to provide ASTM testing procedures that meet or exceed expectations. ISTA Testing or International Safe Transit Association Assessments provide a series of ISTA Testing procedures. The ISTA Testing Series include: Non-Simulation Integrity Performance which screens for strength and robustness of product and package combination. Partial Simulation Performance involves random vibration assessments. General Simulation Performance Evaluations involve the following methods: random vibration and drop and atmospheric examinations. Enhanced Simulation Performance Screening includes general simulation assessments and focused simulation. Focused Simulation Performance Evaluations involve the following analyses: random vibration, drop, thermal, temperature and humidity trials. Development Evaluation involves transport assessments which utilize compression and shock analysis, random vibration and atmospheric assessments. C & C's state of the art Accredited Laboratory and highly skilled engineers are equipped to provide related ISTA Testing procedures and assistance that meet or exceed expectations. Environmental Test Labs must meet MIL STD 883 standards to receive ISO 17025 Accreditation. Before products are placed in the marketplace to face ever-changing environmental conditions, they must under go Shock and Vibration Testing according to MIL STD 883 standards to ensure reliability. Shock and Vibration Testing creates an environment that will show in a short period of time how products stand under adverse field conditions and through out years of change. C & C Technologies Accredited testing facility is MIL STD 883 certified for the Shock and Vibration Testing standards. The scope of our ISO 17025 Accreditation Certificate is posted on our website and provides information for each MIL STD 883 test and the related environmental test types. Cycling Temperature Testing is a way of evaluating a products performance in changing environmental conditions. Cycling Temperature Testing is a way of evaluating coatings as well as the performance of electronic equipment under predetermined conditions. Exact conditions both using thermal movement and relative humidity can be used to control and give exacting conclusions. Cycling Temperature Testing specifications can include time, corrosion, and allowable corrosion per part. Military, commercial and industrial specifications can be effectively evaluated to ensure proper analysis. Detailing of cabinet characteristics, length of time, corrosion, allowable corrosion per part per test, as well as military, commercial and industrial are standard specifications. C & C's knowledgeable technician can assist you in setting your parameters to meet and exceed your Cycling Temperature Testing expectations. Dust testing evaluates products prior to field placement. We live in a world of ever changing environmental conditions and products are supposed to with stand these varied occurrences. Dust testing allows manufacturer insight in determining necessary changes without large expenses or failures. Tests are used to evaluate corrosion resistant properties of coatings, standard specifications and problems that need to be addressed. Dust testing involves placing the required test pieces into a controlled environment to evaluate. Corrosion standards may be set by the individual, by military standards or by commercial or industry standards. Our engineers at C & C's Accredited Lab are knowledgeable in both commercial and industrial specifications giving them advantage in designing pre-existing conditions or appropriate tests that meet or exceed your Dust Testing expectations. The ASTM Testing method is the standard set by The American Society for Tests of Materials. Before products are placed in the marketplace to face ever-changing environmental conditions, they must under go a variety of evaluations to ensure reliability. C & C provides the ASTM Testing method for Salt Spray (Corrosion) Testing. C & C Salt / Fog analysis involve placing the required pieces into a controlled environment to evaluate. The scope of our ISO IEC 17025 Accreditation Certificate is available on our website which details information regarding the evaluating methods used for Salt Spray Assessments including the ASTM Testing method. C & C's Accredited Laboratory and highly skilled engineers are equipped to provide ASTM Testing procedures that meet or exceed expectations. Due to ever changing environmental conditions, Rain Testing is performed to evaluate deterioration resistant properties of coatings, standard specifications and problems that need to be addressed prior to field placement. Rain Testing provides manufacturer insight to determine necessary changes without large expenses or failures. C & C's Rain Testing involves placing the required test pieces into a controlled environment to evaluate. The evaluation standards may be set by the individual, by military standards, or by commercial or industry standards. C & C technicians are knowledgeable in both commercial and industrial specifications allowing them a tremendous advantage in designing pre-existing conditions or appropriate test that meet or exceed expectations. Call 1-866-938-3782 to talk with our technician on how we can serve your Rain Testing needs. C & C offers a wide variety of essential package testing capabilities. New products require proper package testing before they go to the marketplace or field placement. C & C's Accredited Laboratory performs the following types of package testing - random vibration, shock, drop, atmospheric, thermal, and temperature and humidity assessments. By offering a comprehensive A2LA accredited lab, C & C can meet and exceed your demands. C & C technicians have vast experience and backgrounds that can assist you in the solution and analysis process. C & C Technology's Lab is ISO 17025 IEC certified by The American Association for Laboratory Accreditation. Please call 1 - 866 - WeTest2 (1-866-938-3782) for more information on our package testing and how we can serve your needs. Environmental Test Labs must meet MIL STD 810 standards to receive ISO 17025 Accreditation. Before products are placed in the marketplace to face ever-changing environmental conditions, they must under go Shock and Vibration Testing according to MIL STD 810 standards to ensure reliability. Shock and Vibration Testing creates an environment that will show in a short period of time how products stand under adverse field conditions and through out years of change. C & C Technologies Accredited Testing Facility is MIL STD 810 certified for the Shock and Vibration Testing Standards. The scope of our ISO 17025 Accreditation Certificate is posted on our website and provides information for each MIL STD 810 test and the related environmental test types. C & C offers a wide variety of essential Drop Testing capabilities. New products require proper Shock and Drop Testing before they go to the marketplace or field placement. Our engineers at C & C's Accredited Laboratory provide these essential services and are recognized for their accuracy and reliability. Shock and Drop Testing creates an environment that will show in a short period of time how products stand under adverse field conditions and through out years of change. C & C Technology's Accredited Test Facility is ISO 17025 Certified for the Shock and Vibration Test Standards. The scope of our ISO 17025 Accreditation Certificate is posted on our website and provides related information for the MIL STD 810 tests applied to our Vibration, Shock and Drop Testing. Environmental Testing Labs must meet IEC 68 standards to receive ISO 17025 Accreditation for the following environmental assesments: Shock, Sine Vibration and Random Vibration. Before products are placed in the marketplace to face ever-changing environmental conditions, they must under go Shock and Vibration Testing according to IEC 68 Standards to ensure reliability. Shock and Vibration Testing creates an environment that will show in a short period of time how products stand under adverse field conditions and through out years of change. C & C Technologies Accredited Lab is IEC 68 certified for the Shock and Vibration Testing Standards. The scope of our ISO 17025 Accreditation Certificate is posted on our website and provides information for each IEC 68 evaluation and the related environmental analysis type. C & C's engineers are knowledgeable in both commercial and military standard testing applications and specifications. Our engineers have more than 25 years experience to meet and exceed your needs. All military standard testing is performed within EPA regulations. Military standard testing specifications can be effectively evaluated to ensure proper analysis. Specific evaluations can be designed to meet your specific needs. C & C Technology's Lab is ISO 17025 IEC certified by The American Association for Laboratory Accreditation and all equipment analyses are performed according to the ISO 17025 IEC guidelines and principles. The scope of C & C Technology's Lab Accreditation Certificate is posted on our website. Detailing of cabinet characteristics, length of time, corrosion, allowable corrosion per part per evaluation are military standard testing specifications. Mechanical Shock Testing is the most strenuous temperature test used to determine how a product will perform as it expands and contracts under extreme conditions. Before products are placed in the marketplace to face these conditions, they must under go Mechanical Shock Testing to ensure reliability. Mechanical Shock Testing creates an environment that will show in a short period of time how products stand under adverse field conditions and through out years of change. Our state of the art accredited test and evaluating facility at C & C Technologies is certified by The American Association for Laboratory Accreditation. Our ISO IEC 17025 Accreditation Certificate is posted on our website. For questions, quotes or specifics on how we can serve your Mechanical Shock Testing needs, call 1-866-938-3782. Salt Fog Testing evaluates products prior to field placement. We live in a world of ever changing environmental conditions and products are supposed to with stand these varied occurrences Salt Fog Testing allows manufacturer insight in determining necessary changes without large expenses or failures. Tests are used to evaluate corrosion resistant properties of coatings, standard specifications and problems that need to be addressed. Salt Fog Testing involves placing the required test pieces into a controlled environment to evaluate. Corrosion standards may be set by the individual, by military standards or by commercial or industry standards. C & C technicians are knowledgeable in both commercial and industrial specifications allowing them tremendous advantage in designing pre-existing conditions or appropriate tests that meet or exceed your Salt Fog Testing expectations. High Temperature Testing is a way of evaluating a products performance in changing environmental conditions. High Temperature Testing is a way of evaluating coatings as well as the performance of electronic equipment under predetermined conditions. Exact conditions both using thermal movement and relative humidity can be used to control and give exacting conclusions. High Temperature Testing specifications can include time, corrosion, and allowable corrosion per part. Military, commercial and industrial specifications can be effectively evaluated to ensure proper analysis. Detailing of cabinet characteristics, length of time, corrosion, allowable corrosion per part per test, as well as military, commercial and industrial are standard specifications. C & C's knowledgeable technician can assist you in setting your parameters to meet and exceed your High Temperature Testing expectations. Shock Testing is the most strenuous temperature test used to determine how a product will perform as it expands and contracts under extreme conditions. Before products are placed in the marketplace to face these conditions, they must under go Shock Testing to ensure reliability. Shock Testing creates an environment that will show in a short period of time how products stand under adverse field conditions and through out years of change. Our state of the art accredited test and evaluating facility at C & C Technologies is certified by The American Association for Laboratory Accreditation. Our ISO IEC 17025 Accreditation Certificate is posted on our website. For questions, quotes or specifics on how we can serve your Shock Testing needs, call 1-866-938-3782. Product Development Testing is required before goods go to the marketplace or for field placement. C & C offers a wide variety of essential Product Development Testing capabilities. C & C can meet and exceed your demands by offering a comprehensive A2LA accredited lab. �Shake and Bake� tests known as Vibration Tests are just one of the essential services C & C offers for Product Development Testing. These tests are recognized for their accuracy and reliability. C & C technicians have vast experience and backgrounds that can assist you in the solution and analysis process. Our Vibrating tests range from: Sine, Sinusoidal Dwell, Sine and Random, as well as transport and packaging. For more information on our Product Development Testing call 1 - 866 - WeTest2 (1-866-938-3782). New product testing is required before items go to the marketplace or for field placement. C & C offers a wide variety of essential new product testing capabilities. C & C meets and exceeds your demands by offering a comprehensive A2LA accredited lab. "Shake and Bake" tests known as Vibration Tests are just one of the essential services C & C offers for new product testing. These tests are recognized for their accuracy and reliability. C & C technicians have vast experience and backgrounds that can assist you in the solution and analysis process. Our Vibrating tests include: Sine, Sinusoidal Dwell, Sine and Random, as well as transport and packaging. Please call 1 - 866 - WeTest2 (1-866-938-3782) for more information on our new product testing and how we can serve your needs. Thermal Shock Testing is the most strenuous temperature test used to determine how a product will perform as it expands and contracts under extreme conditions. Before products are placed in the marketplace to face these conditions, they must under go Thermal Shock Testing to ensure reliability. Thermal Shock Testing creates an environment that will show in a short period of time how products stand under adverse field conditions and through out years of change. Our state of the art accredited test and evaluating facility at C & C Technologies is certified by The American Association for Laboratory Accreditation. Our ISO IEC 17025 Accreditation Certificate is posted on our website. For questions, quotes or specifics on how we can serve your Thermal Shock Testing needs, call 1-866-938-3782. Humidity Testing is a way of evaluating a products performance in changing environmental conditions. Humidity Testing is a way of evaluating coatings as well as the performance of electronic equipment under predetermined conditions. Exact conditions both using temperature and relative moisture can be used to control and give exacting conclusions. Humidity Testing specifications can include time, corrosion, and allowable corrosion per part. Military, commercial and industrial specifications can be effectively evaluated to ensure proper analysis. Detailing of cabinet characteristics, length of time, corrosion, allowable corrosion per part per test, as well as military, commercial and industrial are standard specifications. C & C's knowledgeable technician can assist you in setting your parameters to meet and exceed your Humidity Testing expectations. Due to ever changing environmental conditions, Corrosion Testing Services are used to evaluate deterioration resistant properties of coatings, standard specifications and problems that need to be addressed prior to field placement. Corrosion Testing Services provide manufacturer insight to determine necessary changes without large expenses or failures. C & C's Corrosion Testing Services involves placing the required test pieces into a controlled environment to evaluate. The evaluation standards may be set by the individual, by military standards, or by commercial or industry standards. Specific tests can be designed to meet your specific needs. C & C technicians are knowledgeable in both commercial and industrial specifications allowing them a tremendous advantage in designing pre-existing conditions or appropriate test that meet or exceed expectations. C & C's Corrosion Testing Services are ISO 17025 Accredited. Temperature Testing is a way of evaluating a products performance in changing environmental conditions. Temperature Testing is a way of evaluating coatings as well as the performance of electronic equipment under predetermined conditions. Exact conditions both using thermal movement and relative humidity can be used to control and give exacting conclusions. Temperature Testing specifications can include time, corrosion, and allowable corrosion per part. Military, commercial and industrial specifications can be effectively evaluated to ensure proper analysis. Detailing of cabinet characteristics, length of time, corrosion, allowable corrosion per part per test, as well as military, commercial and industrial are standard specifications. C & C's knowledgeable technician can assist you in setting your parameters to meet and exceed your Temperature Testing expectations. Due to ever changing environmental conditions, Salt Fog Corrosion Testing is used to evaluate deterioration resistant properties of coatings, standard specifications and problems that need to be addressed prior to field placement. Salt Fog Corrosion Testing provides manufacturer insight to determine necessary changes without large expenses or failures. C & C's Salt Fog Corrosion Testing involves placing the required test pieces into a controlled environment to evaluate. The evaluation standards may be set by the individual, by military standards, or by commercial or industry standards. Specific tests can be designed to meet your specific needs. C & C technicians are knowledgeable in both commercial and industrial specifications allowing them a tremendous advantage in designing pre-existing conditions or appropriate test that meet or exceed Salt Fog Corrosion Testing expectations. Product testing services are required before goods go to the marketplace or for field placement. C & C offers a wide variety of essential product testing services. C & C can meet and exceed your demands by offering a comprehensive A2LA accredited lab. "Shake and Bake" tests known as Vibration Tests are just one of the essential product testing services C & C offers. These tests are recognized for their accuracy and reliability. C & C technicians have vast experience and backgrounds that can assist you in the solution and analysis process. Our Vibrating tests range from: Sine, Sinusoidal Dwell, Sine and Random, as well as transport and packaging. For more information on our product testing services, please call 1 - 866 - WeTest2 (1-866-938-3782). C & C Technology's Accredited Test Lab performs all equipment analyses according to ISO 17025 standards. The ISO 17025 standard is used by Laboratories to implement a quality system that improves the ability to produce valid results consistently. The ISO 17025 standard is used to determine competence and accreditation from an Accreditation Body. Our Test Lab at C & C Technologies has been accredited by The American Association for Laboratory Accreditation. The highly-skilled engineers at C & C's Test Lab are dedicated to providing reliable, cost effective testing equipment and testing services. Knowledgeable in both commercial and military applications and specifications, our engineers have more than 25 years experience to meet and exceed your needs. The scope of C & C Technology's Test Lab Accreditation Certificate is posted on our website. Product testing is required before goods go to the marketplace or for field placement. C & C offers a wide variety of essential product testing capabilities. C & C can meet and exceed your demands by offering a comprehensive A2LA accredited lab. �Shake and Bake� tests known as Vibration Tests are just one of the essential services C & C offers for product testing. These tests are recognized for their accuracy and reliability. C & C technicians have vast experience and backgrounds that can assist you in the solution and analysis process. Our Vibrating tests range from: Sine, Sinusoidal Dwell, Sine and Random, as well as transport and packaging. For more information on our product testing please call 1 - 866 - WeTest2 (1-866-938-3782). C & C Technology´s Environmental Test Lab performs all equipment analyses according to ISO 17025 standards. The ISO 17025 standard is used by Laboratories to implement a quality system that improves the ability to produce valid results consistently. The ISO 17025 standard is used to determine competence and accreditation from an Accreditation Body. C & C Technologies Environmental Test Lab has been accredited by The American Association for Laboratory Accreditation. The Environmental Test Lab at C & C Technologies is dedicated to providing reliable, cost effective testing equipment and testing services. Knowledgeable in both commercial and military applications and specifications, our engineers have more than 25 years experience to meet and exceed your needs. C & C Technology's Environmental Test Lab Accreditation Certificate is posted on our website. Due to ever changing environmental conditions, Corrosion Testing is used to evaluate deterioration resistant properties of coatings, standard specifications and problems that need to be addressed prior to field placement. Corrosion Testing provides manufacturer insight to determine necessary changes without large expenses or failures. C & C Corrosion Testing involves placing the required test pieces into a controlled environment to evaluate. The evaluation standards may be set by the individual, by military standards, or by commercial or industry standards. Specific tests can be designed to meet your specific needs. C & C technicians are knowledgeable in both commercial and industrial specifications allowing them a tremendous advantage in designing pre-existing conditions or appropriate test that meet or exceed Corrosion Testing expectations.
C & C Technologies, Inc. P.O. Box 1137 Apex, NC 27502 (919) 362-1116 (866) WeTest2 [866-938-3782]
